Loose belt keepers available in black or natural vegetable tanned leather with solid brass or silver rivets.
- Includes two belt keepers
- Solid brass or solid brass plated silver
- Vegetable tanned genuine leather
- Made in NYC
All of our belts are gender neutral. To help you in choosing the correct size we use a standard US jeans size guide for men and women. For the perfect fitting belt, choose your actual jeans size.
If you're on the cusp of a size, we generally advise to go smaller rather than bigger as belts can naturally stretch about one hole size over time. For a looser fitting belt, or to wear your belt low waist, go up at least one size bigger.
To be able to wear your belt high and low waist, go up at least one size bigger and request to add holes to your belt. You may also want to add holes to your belt if you’d like to be able to wear it with a dress, or extra high across your real waist, or if you have an especially small waist.
There are 2" in between sizes and 1" in between belt holes. Standard belts have 5 holes, please add a note when ordering if you would like extra holes at 2 hole increments, which will be a total of either, 7, 9, or up to 11 holes.
Our belts are made with the best quality materials we can find. Many of these are sourced from the same place in Ohio from which Rebecca's father sourced his original hardware. Samples are made in Cleveland by her dad and all production is done by hand in New York City’s garment district. We are continuously searching for the most unique and well made parts and strive to make our brand as sustainably responsible as we can.
Storing your belt:
Your belt is built to last and made to be worn as much as possible, however, if you do need to store it, it is best to hang it by the buckle or coil it loosely in your R. Turbow Leather belt bag and keep it in a dark place away from excessive cold or heat.
Cleaning your belt:
If your belt scuffs or marks, clean it lightly with water and a soft cotton or flannel cloth. Wipe it down, let it air dry, and if you feel a leather conditioner or cleaner is needed, please email us for recommendations, with the exact issue you're having. As well, we can accommodate special cleaning needs, and repairs, although unlikely, if ever needed.
Hardware Care:
Solid brass can easily tarnish, especially if left out and uncovered for long periods of time without being worn, and will also tarnish with regular wear. Use the Sunshine Polishing cloth included with your belt, unless you like a more antique brass look, to keep it shiny and polished. If extra polishing is ever needed, please contact us.
Your silver hardware will not tarnish the same way brass will, but it may also need a little polish from time to time, and can generally be done with a polishing cloth or any soft cotton cloth.
For all care related questions please email customercare@rturbowleather.com
Circular center bar buckle "Cinch" belt traditionally used for harnesses, in a heavy weight but soft black vegetable tanned leather, available with solid brass or silver hardware.
- Includes two extra loose belt keepers
- Fits in all standard belt loops
- Leather width 1 ½”
- Buckle height 2 ¼”
- Solid brass or solid brass plated silver
- Vegetable tanned full grain cowhide
- Made in NYC
- Comes in R. Turbow Leather belt bag
- Sizes are based on US jeans sizing, to wear high waist choose your actual size or real waist measurement. If you are on a cusp you can size up or down one size. If have a very small waist size down, to wear mid to low waist, or at hips, size up.
For help figuring out what size to order, please email us, we love to help. Our belts are meant to fit perfectly, and wear constantly.
All of our belts are gender neutral. To help you in choosing the correct size we use a standard US jeans size guide for men and women. For the perfect fitting belt, choose your actual jeans size.
If you're on the cusp of a size, we generally advise to go smaller rather than bigger as belts can naturally stretch about one hole size over time. For a looser fitting belt, or to wear your belt low waist, go up at least one size bigger.
To be able to wear your belt high and low waist, go up at least one size bigger and request to add holes to your belt. You may also want to add holes to your belt if you’d like to be able to wear it with a dress, or extra high across your real waist, or if you have an especially small waist.
There are 2" in between sizes and 1" in between belt holes. Standard belts have 5 holes, please add a note when ordering if you would like extra holes at 2 hole increments, which will be a total of either, 7, 9, or up to 11 holes.
Our belts are made with the best quality materials we can find. Many of these are sourced from the same place in Ohio from which Rebecca's father sourced his original hardware. Samples are made in Cleveland by her dad and all production is done by hand in New York City’s garment district. We are continuously searching for the most unique and well made parts and strive to make our brand as sustainably responsible as we can.
Storing your belt:
Your belt is built to last and made to be worn as much as possible, however, if you do need to store it, it is best to hang it by the buckle or coil it loosely in your R. Turbow Leather belt bag and keep it in a dark place away from excessive cold or heat.
Cleaning your belt:
If your belt scuffs or marks, clean it lightly with water and a soft cotton or flannel cloth. Wipe it down, let it air dry, and if you feel a leather conditioner or cleaner is needed, please email us for recommendations, with the exact issue you're having. As well, we can accommodate special cleaning needs, and repairs, although unlikely, if ever needed.
Hardware Care:
Solid brass can easily tarnish, especially if left out and uncovered for long periods of time without being worn, and will also tarnish with regular wear. Use the Sunshine Polishing cloth included with your belt, unless you like a more antique brass look, to keep it shiny and polished. If extra polishing is ever needed, please contact us.
Your silver hardware will not tarnish the same way brass will, but it may also need a little polish from time to time, and can generally be done with a polishing cloth or any soft cotton cloth.
For all care related questions please email customercare@rturbowleather.com
Classic 1 ½” oval center bar buckle belt in heavy weight black vegetable tanned leather, available with solid brass or silver hardware.
- Includes two extra loose belt keepers
- Fits in all standard belt loops
- Belt width 1 ½”
- Buckle height 2 ¼”
- Solid brass or solid brass plated silver
- Vegetable tanned full grain Italian cowhide
- Made in NYC
- Comes in R. Turbow Leather belt bag
- Brass buckles come with polishing cloth
- Sizes are based on US jeans sizing, choose your actual number size. Belts can naturally stretch one hole size over time, if you are on a cusp you can size up or down one size. To wear your pants higher waist size down, to wear them lower waist or for a more loose fitting belt, size up.
All of our belts are gender neutral. To help you in choosing the correct size we use a standard US jeans size guide for men and women. For the perfect fitting belt, choose your actual jeans size.
If you're on the cusp of a size, we generally advise to go smaller rather than bigger as belts can naturally stretch about one hole size over time. For a looser fitting belt, or to wear your belt low waist, go up at least one size bigger.
To be able to wear your belt high and low waist, go up at least one size bigger and request to add holes to your belt. You may also want to add holes to your belt if you’d like to be able to wear it with a dress, or extra high across your real waist, or if you have an especially small waist.
There are 2" in between sizes and 1" in between belt holes. Standard belts have 5 holes, please add a note when ordering if you would like extra holes at 2 hole increments, which will be a total of either, 7, 9, or up to 11 holes.
Our belts are made with the best quality materials we can find. Many of these are sourced from the same place in Ohio from which Rebecca's father sourced his original hardware. Samples are made in Cleveland by her dad and all production is done by hand in New York City’s garment district. We are continuously searching for the most unique and well made parts and strive to make our brand as sustainably responsible as we can.
Storing your belt:
Your belt is built to last and made to be worn as much as possible, however, if you do need to store it, it is best to hang it by the buckle or coil it loosely in your R. Turbow Leather belt bag and keep it in a dark place away from excessive cold or heat.
Cleaning your belt:
If your belt scuffs or marks, clean it lightly with water and a soft cotton or flannel cloth. Wipe it down, let it air dry, and if you feel a leather conditioner or cleaner is needed, please email us for recommendations, with the exact issue you're having. As well, we can accommodate special cleaning needs, and repairs, although unlikely, if ever needed.
Hardware Care:
Solid brass can easily tarnish, especially if left out and uncovered for long periods of time without being worn, and will also tarnish with regular wear. Use the Sunshine Polishing cloth included with your belt, unless you like a more antique brass look, to keep it shiny and polished. If extra polishing is ever needed, please contact us.
Your silver hardware will not tarnish the same way brass will, but it may also need a little polish from time to time, and can generally be done with a polishing cloth or any soft cotton cloth.
For all care related questions please email customercare@rturbowleather.com
Classic 1 ½” square center bar buckle belt in a heavy weight black vegetable tanned leather or natural vegetable tanned leather, in solid brass or silver hardware.
- Includes one extra loose belt keeper
- Fits in all standard belt loops
- Leather width 1 ½”
- Buckle height 2”
- Solid brass or solid brass plated silver
- Black - vegetable tanned genuine Italian cowhide
- Natural - vegetable tanned genuine Belgian cowhide
- Made in NYC
- Comes in R. Turbow Leather belt bag
- Sizes are based on US jeans sizing, choose your actual jeans size. Belts can naturally stretch one hole size over time, so if you are on a cusp size down to the smaller size. To wear them lower waist or for a more loose fitting belt, size up one to two sizes.
- You can also request to add holes to your belt. There are 2" in between sizes and 1" in between belt holes. Standard belts have 5 holes, please add a note when ordering if you would like extra holes at a total of either, 7, 9, or 11. So for example, if you get a larger size and add 2 holes, you will be adding one size down to your belt. This can be good if you would like to be able to wear it both higher and lower on your waist or hips.
For additional help figuring out what size to order, please email us, we love to help. Our belts are meant to fit perfectly, and wear constantly.
All of our belts are gender neutral. To help you in choosing the correct size we use a standard US jeans size guide for men and women. For the perfect fitting belt, choose your actual jeans size.
If you're on the cusp of a size, we generally advise to go smaller rather than bigger as belts can naturally stretch about one hole size over time. For a looser fitting belt, or to wear your belt low waist, go up at least one size bigger.
To be able to wear your belt high and low waist, go up at least one size bigger and request to add holes to your belt. You may also want to add holes to your belt if you’d like to be able to wear it with a dress, or extra high across your real waist, or if you have an especially small waist.
There are 2" in between sizes and 1" in between belt holes. Standard belts have 5 holes, please add a note when ordering if you would like extra holes at 2 hole increments, which will be a total of either, 7, 9, or up to 11 holes.
Our belts are made with the best quality materials we can find. Many of these are sourced from the same place in Ohio from which Rebecca's father sourced his original hardware. Samples are made in Cleveland by her dad and all production is done by hand in New York City’s garment district. We are continuously searching for the most unique and well made parts and strive to make our brand as sustainably responsible as we can.
Storing your belt:
Your belt is built to last and made to be worn as much as possible, however, if you do need to store it, it is best to hang it by the buckle or coil it loosely in your R. Turbow Leather belt bag and keep it in a dark place away from excessive cold or heat.
Cleaning your belt:
If your belt scuffs or marks, clean it lightly with water and a soft cotton or flannel cloth. Wipe it down, let it air dry, and if you feel a leather conditioner or cleaner is needed, please email us for recommendations, with the exact issue you're having. As well, we can accommodate special cleaning needs, and repairs, although unlikely, if ever needed.
Hardware Care:
Solid brass can easily tarnish, especially if left out and uncovered for long periods of time without being worn, and will also tarnish with regular wear. Use the Sunshine Polishing cloth included with your belt, unless you like a more antique brass look, to keep it shiny and polished. If extra polishing is ever needed, please contact us.
Your silver hardware will not tarnish the same way brass will, but it may also need a little polish from time to time, and can generally be done with a polishing cloth or any soft cotton cloth.
For all care related questions please email customercare@rturbowleather.com
Double bar 1 ½” wide rectangle buckle belt in matte black vegetable tanned leather, with solid brass hardware.
- Includes two extra loose belt keepers
- Fits in all standard belt loops
- Belt width 1 ½”
- Buckle height 1 ¾”
- Solid brass
- Vegetable tanned genuine water buffalo
- Made in NYC
- Sizes are based on US jeans sizing, to wear high waist choose your actual size or real waist measurement. If you are on a cusp you can size up or down one size. If have a very small waist size down, to wear mid to low waist, or at hips, size up.
All of our belts are gender neutral. To help you in choosing the correct size we use a standard US jeans size guide for men and women. For the perfect fitting belt, choose your actual jeans size.
If you're on the cusp of a size, we generally advise to go smaller rather than bigger as belts can naturally stretch about one hole size over time. For a looser fitting belt, or to wear your belt low waist, go up at least one size bigger.
To be able to wear your belt high and low waist, go up at least one size bigger and request to add holes to your belt. You may also want to add holes to your belt if you’d like to be able to wear it with a dress, or extra high across your real waist, or if you have an especially small waist.
There are 2" in between sizes and 1" in between belt holes. Standard belts have 5 holes, please add a note when ordering if you would like extra holes at 2 hole increments, which will be a total of either, 7, 9, or up to 11 holes.
Our belts are made with the best quality materials we can find. Many of these are sourced from the same place in Ohio from which Rebecca's father sourced his original hardware. Samples are made in Cleveland by her dad and all production is done by hand in New York City’s garment district. We are continuously searching for the most unique and well made parts and strive to make our brand as sustainably responsible as we can.
Storing your belt:
Your belt is built to last and made to be worn as much as possible, however, if you do need to store it, it is best to hang it by the buckle or coil it loosely in your R. Turbow Leather belt bag and keep it in a dark place away from excessive cold or heat.
Cleaning your belt:
If your belt scuffs or marks, clean it lightly with water and a soft cotton or flannel cloth. Wipe it down, let it air dry, and if you feel a leather conditioner or cleaner is needed, please email us for recommendations, with the exact issue you're having. As well, we can accommodate special cleaning needs, and repairs, although unlikely, if ever needed.
Hardware Care:
Solid brass can easily tarnish, especially if left out and uncovered for long periods of time without being worn, and will also tarnish with regular wear. Use the Sunshine Polishing cloth included with your belt, unless you like a more antique brass look, to keep it shiny and polished. If extra polishing is ever needed, please contact us.
Your silver hardware will not tarnish the same way brass will, but it may also need a little polish from time to time, and can generally be done with a polishing cloth or any soft cotton cloth.
For all care related questions please email customercare@rturbowleather.com
Classic 1" center bar square buckle belt in soft heavy weight black vegetable tanned leather, available with solid brass or silver hardware.
- Includes two extra loose belt keepers
- Fits in all standard belt loops
- Leather width 7/8"
- Buckle height 1 ¼”
- Solid brass or solid brass plated silver
- Vegetable tanned full grain cowhide
- Made in NYC
- This style has a longer belt end than all other styles.
- Sizes are based on US jeans sizing, choose your actual jeans size. To wear low waist go up one size bigger. To be able to wear high and low waist, go up at least one size bigger and request to add holes to your belt. There are 2" in between sizes and 1" in between belt holes. Standard belts have 5 holes, please add a note when ordering if you would like extra holes at a total of either, 7, 9, or 11.
All of our belts are gender neutral. To help you in choosing the correct size we use a standard US jeans size guide for men and women. For the perfect fitting belt, choose your actual jeans size.
If you're on the cusp of a size, we generally advise to go smaller rather than bigger as belts can naturally stretch about one hole size over time. For a looser fitting belt, or to wear your belt low waist, go up at least one size bigger.
To be able to wear your belt high and low waist, go up at least one size bigger and request to add holes to your belt. You may also want to add holes to your belt if you’d like to be able to wear it with a dress, or extra high across your real waist, or if you have an especially small waist.
There are 2" in between sizes and 1" in between belt holes. Standard belts have 5 holes, please add a note when ordering if you would like extra holes at 2 hole increments, which will be a total of either, 7, 9, or up to 11 holes.
Our belts are made with the best quality materials we can find. Many of these are sourced from the same place in Ohio from which Rebecca's father sourced his original hardware. Samples are made in Cleveland by her dad and all production is done by hand in New York City’s garment district. We are continuously searching for the most unique and well made parts and strive to make our brand as sustainably responsible as we can.
Storing your belt:
Your belt is built to last and made to be worn as much as possible, however, if you do need to store it, it is best to hang it by the buckle or coil it loosely in your R. Turbow Leather belt bag and keep it in a dark place away from excessive cold or heat.
Cleaning your belt:
If your belt scuffs or marks, clean it lightly with water and a soft cotton or flannel cloth. Wipe it down, let it air dry, and if you feel a leather conditioner or cleaner is needed, please email us for recommendations, with the exact issue you're having. As well, we can accommodate special cleaning needs, and repairs, although unlikely, if ever needed.
Hardware Care:
Solid brass can easily tarnish, especially if left out and uncovered for long periods of time without being worn, and will also tarnish with regular wear. Use the Sunshine Polishing cloth included with your belt, unless you like a more antique brass look, to keep it shiny and polished. If extra polishing is ever needed, please contact us.
Your silver hardware will not tarnish the same way brass will, but it may also need a little polish from time to time, and can generally be done with a polishing cloth or any soft cotton cloth.
For all care related questions please email customercare@rturbowleather.com
Classic 1 ¾” extra wide center bar buckle belt in a heavy weight black vegetable tanned leather, available with solid brass or silver hardware.
- Includes two extra loose belt keepers
- Fits in all standard belt loops
- Leather width 1 ¾”
- Buckle height 2 ½”
- Solid brass or solid brass plated silver
- Vegetable tanned genuine water buffalo
- Made in NYC
- Comes in R. Turbow Leather belt bag
- Brass buckles come with polishing cloth
- Sizes are based on US jeans sizing, to wear high waist choose your actual size or real waist measurement. If you are on a cusp you can size up or down one size, as well, belts can stretch up to a hole size, depending on how you wear it. If have a very small waist size down, to wear mid to low waist, or at hips, size up.
For help figuring out what size to order, please email us, we love to help. Our belts are meant to fit perfectly, and wear constantly.
All of our belts are gender neutral. To help you in choosing the correct size we use a standard US jeans size guide for men and women. For the perfect fitting belt, choose your actual jeans size.
If you're on the cusp of a size, we generally advise to go smaller rather than bigger as belts can naturally stretch about one hole size over time. For a looser fitting belt, or to wear your belt low waist, go up at least one size bigger.
To be able to wear your belt high and low waist, go up at least one size bigger and request to add holes to your belt. You may also want to add holes to your belt if you’d like to be able to wear it with a dress, or extra high across your real waist, or if you have an especially small waist.
There are 2" in between sizes and 1" in between belt holes. Standard belts have 5 holes, please add a note when ordering if you would like extra holes at 2 hole increments, which will be a total of either, 7, 9, or up to 11 holes.
Our belts are made with the best quality materials we can find. Many of these are sourced from the same place in Ohio from which Rebecca's father sourced his original hardware. Samples are made in Cleveland by her dad and all production is done by hand in New York City’s garment district. We are continuously searching for the most unique and well made parts and strive to make our brand as sustainably responsible as we can.
Storing your belt:
Your belt is built to last and made to be worn as much as possible, however, if you do need to store it, it is best to hang it by the buckle or coil it loosely in your R. Turbow Leather belt bag and keep it in a dark place away from excessive cold or heat.
Cleaning your belt:
If your belt scuffs or marks, clean it lightly with water and a soft cotton or flannel cloth. Wipe it down, let it air dry, and if you feel a leather conditioner or cleaner is needed, please email us for recommendations, with the exact issue you're having. As well, we can accommodate special cleaning needs, and repairs, although unlikely, if ever needed.
Hardware Care:
Solid brass can easily tarnish, especially if left out and uncovered for long periods of time without being worn, and will also tarnish with regular wear. Use the Sunshine Polishing cloth included with your belt, unless you like a more antique brass look, to keep it shiny and polished. If extra polishing is ever needed, please contact us.
Your silver hardware will not tarnish the same way brass will, but it may also need a little polish from time to time, and can generally be done with a polishing cloth or any soft cotton cloth.
For all care related questions please email customercare@rturbowleather.com
Extra wide 1 ¾” double ring belt in soft black vegetable tanned leather, with solid brass hardware.
- Includes two attached belt keepers
- Belt width 1 ¾”
- Buckle height 2 ½”
- Solid brass
- Vegetable tanned full grain cowhide
- Made in NYC
- Sizes are based on US jeans sizing, to wear high waist choose your actual size or real waist measurement. If you are on a cusp you can size up or down one size. If have a very small waist size down, to wear mid to low waist, or at hips, size up.
This style is made to order, please allow 2-4 weeks for shipping.
All of our belts are gender neutral. To help you in choosing the correct size we use a standard US jeans size guide for men and women. For the perfect fitting belt, choose your actual jeans size.
If you're on the cusp of a size, we generally advise to go smaller rather than bigger as belts can naturally stretch about one hole size over time. For a looser fitting belt, or to wear your belt low waist, go up at least one size bigger.
To be able to wear your belt high and low waist, go up at least one size bigger and request to add holes to your belt. You may also want to add holes to your belt if you’d like to be able to wear it with a dress, or extra high across your real waist, or if you have an especially small waist.
There are 2" in between sizes and 1" in between belt holes. Standard belts have 5 holes, please add a note when ordering if you would like extra holes at 2 hole increments, which will be a total of either, 7, 9, or up to 11 holes.
Our belts are made with the best quality materials we can find. Many of these are sourced from the same place in Ohio from which Rebecca's father sourced his original hardware. Samples are made in Cleveland by her dad and all production is done by hand in New York City’s garment district. We are continuously searching for the most unique and well made parts and strive to make our brand as sustainably responsible as we can.
Storing your belt:
Your belt is built to last and made to be worn as much as possible, however, if you do need to store it, it is best to hang it by the buckle or coil it loosely in your R. Turbow Leather belt bag and keep it in a dark place away from excessive cold or heat.
Cleaning your belt:
If your belt scuffs or marks, clean it lightly with water and a soft cotton or flannel cloth. Wipe it down, let it air dry, and if you feel a leather conditioner or cleaner is needed, please email us for recommendations, with the exact issue you're having. As well, we can accommodate special cleaning needs, and repairs, although unlikely, if ever needed.
Hardware Care:
Solid brass can easily tarnish, especially if left out and uncovered for long periods of time without being worn, and will also tarnish with regular wear. Use the Sunshine Polishing cloth included with your belt, unless you like a more antique brass look, to keep it shiny and polished. If extra polishing is ever needed, please contact us.
Your silver hardware will not tarnish the same way brass will, but it may also need a little polish from time to time, and can generally be done with a polishing cloth or any soft cotton cloth.
For all care related questions please email customercare@rturbowleather.com
Please contact us if you need a custom amount not listed.
All of our belts are gender neutral. To help you in choosing the correct size we use a standard US jeans size guide for men and women. For the perfect fitting belt, choose your actual jeans size.
If you're on the cusp of a size, we generally advise to go smaller rather than bigger as belts can naturally stretch about one hole size over time. For a looser fitting belt, or to wear your belt low waist, go up at least one size bigger.
To be able to wear your belt high and low waist, go up at least one size bigger and request to add holes to your belt. You may also want to add holes to your belt if you’d like to be able to wear it with a dress, or extra high across your real waist, or if you have an especially small waist.
There are 2" in between sizes and 1" in between belt holes. Standard belts have 5 holes, please add a note when ordering if you would like extra holes at 2 hole increments, which will be a total of either, 7, 9, or up to 11 holes.
Our belts are made with the best quality materials we can find. Many of these are sourced from the same place in Ohio from which Rebecca's father sourced his original hardware. Samples are made in Cleveland by her dad and all production is done by hand in New York City’s garment district. We are continuously searching for the most unique and well made parts and strive to make our brand as sustainably responsible as we can.
Storing your belt:
Your belt is built to last and made to be worn as much as possible, however, if you do need to store it, it is best to hang it by the buckle or coil it loosely in your R. Turbow Leather belt bag and keep it in a dark place away from excessive cold or heat.
Cleaning your belt:
If your belt scuffs or marks, clean it lightly with water and a soft cotton or flannel cloth. Wipe it down, let it air dry, and if you feel a leather conditioner or cleaner is needed, please email us for recommendations, with the exact issue you're having. As well, we can accommodate special cleaning needs, and repairs, although unlikely, if ever needed.
Hardware Care:
Solid brass can easily tarnish, especially if left out and uncovered for long periods of time without being worn, and will also tarnish with regular wear. Use the Sunshine Polishing cloth included with your belt, unless you like a more antique brass look, to keep it shiny and polished. If extra polishing is ever needed, please contact us.
Your silver hardware will not tarnish the same way brass will, but it may also need a little polish from time to time, and can generally be done with a polishing cloth or any soft cotton cloth.
For all care related questions please email customercare@rturbowleather.com
Wide 2 1/4" o-ring belt in soft black vegetable tanned leather, available with solid brass or silver hardware.
- Belt width 2 ¼”
- Buckle height 3 ½”
- Solid brass
- Vegetable tanned full grain cowhide
- Made in NYC
- Comes in R. Turbow Leather belt bag
- Brass buckles come with polishing cloth
- Sizes are based on US jeans sizing, choose your actual size or real waist measurement. This belt is meant to fit high waist.
This style is made to order, please allow 2-4 weeks for shipping.
All of our belts are gender neutral. To help you in choosing the correct size we use a standard US jeans size guide for men and women. For the perfect fitting belt, choose your actual jeans size.
If you're on the cusp of a size, we generally advise to go smaller rather than bigger as belts can naturally stretch about one hole size over time. For a looser fitting belt, or to wear your belt low waist, go up at least one size bigger.
To be able to wear your belt high and low waist, go up at least one size bigger and request to add holes to your belt. You may also want to add holes to your belt if you’d like to be able to wear it with a dress, or extra high across your real waist, or if you have an especially small waist.
There are 2" in between sizes and 1" in between belt holes. Standard belts have 5 holes, please add a note when ordering if you would like extra holes at 2 hole increments, which will be a total of either, 7, 9, or up to 11 holes.
Our belts are made with the best quality materials we can find. Many of these are sourced from the same place in Ohio from which Rebecca's father sourced his original hardware. Samples are made in Cleveland by her dad and all production is done by hand in New York City’s garment district. We are continuously searching for the most unique and well made parts and strive to make our brand as sustainably responsible as we can.
Storing your belt:
Your belt is built to last and made to be worn as much as possible, however, if you do need to store it, it is best to hang it by the buckle or coil it loosely in your R. Turbow Leather belt bag and keep it in a dark place away from excessive cold or heat.
Cleaning your belt:
If your belt scuffs or marks, clean it lightly with water and a soft cotton or flannel cloth. Wipe it down, let it air dry, and if you feel a leather conditioner or cleaner is needed, please email us for recommendations, with the exact issue you're having. As well, we can accommodate special cleaning needs, and repairs, although unlikely, if ever needed.
Hardware Care:
Solid brass can easily tarnish, especially if left out and uncovered for long periods of time without being worn, and will also tarnish with regular wear. Use the Sunshine Polishing cloth included with your belt, unless you like a more antique brass look, to keep it shiny and polished. If extra polishing is ever needed, please contact us.
Your silver hardware will not tarnish the same way brass will, but it may also need a little polish from time to time, and can generally be done with a polishing cloth or any soft cotton cloth.
For all care related questions please email customercare@rturbowleather.com
Classic extra slim ¾” square buckle belt in soft black vegetable tanned leather, available with solid brass or silver hardware.
- Includes two extra loose belt keepers
- Belt width ¾”
- Buckle height 1"
- Solid brass or solid brass plated silver
- Vegetable tanned full grain cowhide
- Made in NYC
- Comes in R. Turbow Leather belt bag
- Sizes are based on US jeans sizing, to wear high waist choose your actual size or real waist measurement. If you are on a cusp you can size up or down one size. If have a very small waist size down, to wear mid to low waist, or at hips, size up.
Styled here with the 1" Slim Classic Square Buckle Belt.
This style is preorder, please allow 2-4 weeks for shipping.
All of our belts are gender neutral. To help you in choosing the correct size we use a standard US jeans size guide for men and women. For the perfect fitting belt, choose your actual jeans size.
If you're on the cusp of a size, we generally advise to go smaller rather than bigger as belts can naturally stretch about one hole size over time. For a looser fitting belt, or to wear your belt low waist, go up at least one size bigger.
To be able to wear your belt high and low waist, go up at least one size bigger and request to add holes to your belt. You may also want to add holes to your belt if you’d like to be able to wear it with a dress, or extra high across your real waist, or if you have an especially small waist.
There are 2" in between sizes and 1" in between belt holes. Standard belts have 5 holes, please add a note when ordering if you would like extra holes at 2 hole increments, which will be a total of either, 7, 9, or up to 11 holes.
Our belts are made with the best quality materials we can find. Many of these are sourced from the same place in Ohio from which Rebecca's father sourced his original hardware. Samples are made in Cleveland by her dad and all production is done by hand in New York City’s garment district. We are continuously searching for the most unique and well made parts and strive to make our brand as sustainably responsible as we can.
Storing your belt:
Your belt is built to last and made to be worn as much as possible, however, if you do need to store it, it is best to hang it by the buckle or coil it loosely in your R. Turbow Leather belt bag and keep it in a dark place away from excessive cold or heat.
Cleaning your belt:
If your belt scuffs or marks, clean it lightly with water and a soft cotton or flannel cloth. Wipe it down, let it air dry, and if you feel a leather conditioner or cleaner is needed, please email us for recommendations, with the exact issue you're having. As well, we can accommodate special cleaning needs, and repairs, although unlikely, if ever needed.
Hardware Care:
Solid brass can easily tarnish, especially if left out and uncovered for long periods of time without being worn, and will also tarnish with regular wear. Use the Sunshine Polishing cloth included with your belt, unless you like a more antique brass look, to keep it shiny and polished. If extra polishing is ever needed, please contact us.
Your silver hardware will not tarnish the same way brass will, but it may also need a little polish from time to time, and can generally be done with a polishing cloth or any soft cotton cloth.
For all care related questions please email customercare@rturbowleather.com
Classic 1 ¼” square center bar buckle belt in a heavy weight black or natural vegetable tanned cowhide leather, available with solid brass or silver hardware.
- Includes one extra loose belt keeper
- Fits in all standard belt loops
- Leather width 1 ¼”
- Buckle height 1 ½”
- Solid brass or solid brass plated silver
- Black - vegetable tanned genuine Italian cowhide
- Natural - vegetable tanned genuine Belgian cowhide
- Made in NYC
- Comes in R. Turbow Leather belt bag
- Brass buckles come with polishing cloth
- Sizes are based on US jeans sizing, choose your actual jeans size. Belts can naturally stretch one hole size over time, so if you are on a cusp size down to the smaller size. To wear them lower waist or for a more loose fitting belt, size up one to two sizes.
- You can also request to add holes to your belt. There are 2" in between sizes and 1" in between belt holes. Standard belts have 5 holes, please add a note when ordering if you would like extra holes at a total of either, 7, 9, or 11. So for example, if you get a larger size and add 2 holes, you will be adding one size down to your belt. This can be good if you would like to be able to wear it both higher and lower on your waist or hips.
For help figuring out what size to order, please email us, we love to help. Our belts are meant to fit perfectly, and wear constantly.
All of our belts are gender neutral. To help you in choosing the correct size we use a standard US jeans size guide for men and women. For the perfect fitting belt, choose your actual jeans size.
If you're on the cusp of a size, we generally advise to go smaller rather than bigger as belts can naturally stretch about one hole size over time. For a looser fitting belt, or to wear your belt low waist, go up at least one size bigger.
To be able to wear your belt high and low waist, go up at least one size bigger and request to add holes to your belt. You may also want to add holes to your belt if you’d like to be able to wear it with a dress, or extra high across your real waist, or if you have an especially small waist.
There are 2" in between sizes and 1" in between belt holes. Standard belts have 5 holes, please add a note when ordering if you would like extra holes at 2 hole increments, which will be a total of either, 7, 9, or up to 11 holes.
Our belts are made with the best quality materials we can find. Many of these are sourced from the same place in Ohio from which Rebecca's father sourced his original hardware. Samples are made in Cleveland by her dad and all production is done by hand in New York City’s garment district. We are continuously searching for the most unique and well made parts and strive to make our brand as sustainably responsible as we can.
Storing your belt:
Your belt is built to last and made to be worn as much as possible, however, if you do need to store it, it is best to hang it by the buckle or coil it loosely in your R. Turbow Leather belt bag and keep it in a dark place away from excessive cold or heat.
Cleaning your belt:
If your belt scuffs or marks, clean it lightly with water and a soft cotton or flannel cloth. Wipe it down, let it air dry, and if you feel a leather conditioner or cleaner is needed, please email us for recommendations, with the exact issue you're having. As well, we can accommodate special cleaning needs, and repairs, although unlikely, if ever needed.
Hardware Care:
Solid brass can easily tarnish, especially if left out and uncovered for long periods of time without being worn, and will also tarnish with regular wear. Use the Sunshine Polishing cloth included with your belt, unless you like a more antique brass look, to keep it shiny and polished. If extra polishing is ever needed, please contact us.
Your silver hardware will not tarnish the same way brass will, but it may also need a little polish from time to time, and can generally be done with a polishing cloth or any soft cotton cloth.
For all care related questions please email customercare@rturbowleather.com
Slim 1 ¼” double ring belt in soft black vegetable tanned leather, with solid brass hardware.
- Includes two attached belt keepers
- Belt width 1 ¾”
- Buckle height 2 ½”
- Solid brass
- Vegetable tanned full grain cowhide
- Made in NYC
- Comes in R. Turbow Leather belt bag
- Brass buckles come with polishing cloth
- Sizes are based on US jeans sizing, to wear high waist choose your actual size or real waist measurement. If you are on a cusp you can size up or down one size. If have a very small waist size down, to wear mid to low waist, or at hips, size up.
This style is made to order, please allow 2-4 weeks for shipping.
All of our belts are gender neutral. To help you in choosing the correct size we use a standard US jeans size guide for men and women. For the perfect fitting belt, choose your actual jeans size.
If you're on the cusp of a size, we generally advise to go smaller rather than bigger as belts can naturally stretch about one hole size over time. For a looser fitting belt, or to wear your belt low waist, go up at least one size bigger.
To be able to wear your belt high and low waist, go up at least one size bigger and request to add holes to your belt. You may also want to add holes to your belt if you’d like to be able to wear it with a dress, or extra high across your real waist, or if you have an especially small waist.
There are 2" in between sizes and 1" in between belt holes. Standard belts have 5 holes, please add a note when ordering if you would like extra holes at 2 hole increments, which will be a total of either, 7, 9, or up to 11 holes.
Our belts are made with the best quality materials we can find. Many of these are sourced from the same place in Ohio from which Rebecca's father sourced his original hardware. Samples are made in Cleveland by her dad and all production is done by hand in New York City’s garment district. We are continuously searching for the most unique and well made parts and strive to make our brand as sustainably responsible as we can.
Storing your belt:
Your belt is built to last and made to be worn as much as possible, however, if you do need to store it, it is best to hang it by the buckle or coil it loosely in your R. Turbow Leather belt bag and keep it in a dark place away from excessive cold or heat.
Cleaning your belt:
If your belt scuffs or marks, clean it lightly with water and a soft cotton or flannel cloth. Wipe it down, let it air dry, and if you feel a leather conditioner or cleaner is needed, please email us for recommendations, with the exact issue you're having. As well, we can accommodate special cleaning needs, and repairs, although unlikely, if ever needed.
Hardware Care:
Solid brass can easily tarnish, especially if left out and uncovered for long periods of time without being worn, and will also tarnish with regular wear. Use the Sunshine Polishing cloth included with your belt, unless you like a more antique brass look, to keep it shiny and polished. If extra polishing is ever needed, please contact us.
Your silver hardware will not tarnish the same way brass will, but it may also need a little polish from time to time, and can generally be done with a polishing cloth or any soft cotton cloth.
For all care related questions please email customercare@rturbowleather.com
Classic 1 ¼” wide square center bar buckle belt in a heavy weight polished black 100% vegetable tanned full grain leather. Available with solid brass or silver hardware.
- Includes two extra loose belt keepers with rivet detail
- Fits in all standard belt loops
- Leather width 1 ¼”
- Buckle height 1 ¾”
- Solid brass or solid brass plated silver
- Vegetable tanned genuine water buffalo
- Made in NYC
- Comes in R. Turbow Leather belt bag
- Brass buckles come with polishing cloth
- Sizes are based on US jeans sizing, choose your actual size. Belts can naturally stretch one hole size over time, if you are on a cusp you can size up or down one size. To wear your pants higher waist size down, to wear them lower waist or for a more loose fitting belt, size up.
For help figuring out what size to order, please email us. This style is also available at Judi Rosen NYC and online at www.judirosenny.com
All of our belts are gender neutral. To help you in choosing the correct size we use a standard US jeans size guide for men and women. For the perfect fitting belt, choose your actual jeans size.
If you're on the cusp of a size, we generally advise to go smaller rather than bigger as belts can naturally stretch about one hole size over time. For a looser fitting belt, or to wear your belt low waist, go up at least one size bigger.
To be able to wear your belt high and low waist, go up at least one size bigger and request to add holes to your belt. You may also want to add holes to your belt if you’d like to be able to wear it with a dress, or extra high across your real waist, or if you have an especially small waist.
There are 2" in between sizes and 1" in between belt holes. Standard belts have 5 holes, please add a note when ordering if you would like extra holes at 2 hole increments, which will be a total of either, 7, 9, or up to 11 holes.
Our belts are made with the best quality materials we can find. Many of these are sourced from the same place in Ohio from which Rebecca's father sourced his original hardware. Samples are made in Cleveland by her dad and all production is done by hand in New York City’s garment district. We are continuously searching for the most unique and well made parts and strive to make our brand as sustainably responsible as we can.
Storing your belt:
Your belt is built to last and made to be worn as much as possible, however, if you do need to store it, it is best to hang it by the buckle or coil it loosely in your R. Turbow Leather belt bag and keep it in a dark place away from excessive cold or heat.
Cleaning your belt:
If your belt scuffs or marks, clean it lightly with water and a soft cotton or flannel cloth. Wipe it down, let it air dry, and if you feel a leather conditioner or cleaner is needed, please email us for recommendations, with the exact issue you're having. As well, we can accommodate special cleaning needs, and repairs, although unlikely, if ever needed.
Hardware Care:
Solid brass can easily tarnish, especially if left out and uncovered for long periods of time without being worn, and will also tarnish with regular wear. Use the Sunshine Polishing cloth included with your belt, unless you like a more antique brass look, to keep it shiny and polished. If extra polishing is ever needed, please contact us.
Your silver hardware will not tarnish the same way brass will, but it may also need a little polish from time to time, and can generally be done with a polishing cloth or any soft cotton cloth.
For all care related questions please email customercare@rturbowleather.com
Classic 1 ¼” wide square center bar buckle belt with metal belt keeper in a heavy weight polished black 100% vegetable tanned cowhide leather, available with solid brass or silver hardware.
- Includes two extra loose leather belt keepers
- Fits in all standard belt loops
- Leather width 1 ¼”
- Buckle height 1 ¾”
- Solid brass or solid brass plated silver
- Vegetable tanned genuine water buffalo
- Made in NYC
- Comes in R. Turbow Leather belt bag
- Brass buckles come with polishing cloth
- Sizes are based on US jeans sizing, choose your actual size. Belts can naturally stretch one hole size over time, if you are on a cusp you can size up or down one size. To wear your pants higher waist size down, to wear them lower waist or for a more loose fitting belt, size up.
For help figuring out what size to order, please email us, we love to help. Our belts are meant to fit perfectly, and wear constantly.
All of our belts are gender neutral. To help you in choosing the correct size we use a standard US jeans size guide for men and women. For the perfect fitting belt, choose your actual jeans size.
If you're on the cusp of a size, we generally advise to go smaller rather than bigger as belts can naturally stretch about one hole size over time. For a looser fitting belt, or to wear your belt low waist, go up at least one size bigger.
To be able to wear your belt high and low waist, go up at least one size bigger and request to add holes to your belt. You may also want to add holes to your belt if you’d like to be able to wear it with a dress, or extra high across your real waist, or if you have an especially small waist.
There are 2" in between sizes and 1" in between belt holes. Standard belts have 5 holes, please add a note when ordering if you would like extra holes at 2 hole increments, which will be a total of either, 7, 9, or up to 11 holes.
Our belts are made with the best quality materials we can find. Many of these are sourced from the same place in Ohio from which Rebecca's father sourced his original hardware. Samples are made in Cleveland by her dad and all production is done by hand in New York City’s garment district. We are continuously searching for the most unique and well made parts and strive to make our brand as sustainably responsible as we can.
Storing your belt:
Your belt is built to last and made to be worn as much as possible, however, if you do need to store it, it is best to hang it by the buckle or coil it loosely in your R. Turbow Leather belt bag and keep it in a dark place away from excessive cold or heat.
Cleaning your belt:
If your belt scuffs or marks, clean it lightly with water and a soft cotton or flannel cloth. Wipe it down, let it air dry, and if you feel a leather conditioner or cleaner is needed, please email us for recommendations, with the exact issue you're having. As well, we can accommodate special cleaning needs, and repairs, although unlikely, if ever needed.
Hardware Care:
Solid brass can easily tarnish, especially if left out and uncovered for long periods of time without being worn, and will also tarnish with regular wear. Use the Sunshine Polishing cloth included with your belt, unless you like a more antique brass look, to keep it shiny and polished. If extra polishing is ever needed, please contact us.
Your silver hardware will not tarnish the same way brass will, but it may also need a little polish from time to time, and can generally be done with a polishing cloth or any soft cotton cloth.
For all care related questions please email customercare@rturbowleather.com
Classic 1 ½” wide center bar buckle belt in a heavy weight black vegetable tanned leather, natural vegetable tanned leather, or soft black vegetable tanned leather, available with solid brass or silver hardware.
- Includes one extra loose belt keeper
- Fits in all standard belt loops
- Belt width 1 ½”
- Buckle height 2 ¼”
- Solid brass or solid brass plated silver
- Black - vegetable tanned genuine Italian cowhide
- Soft Black - vegetable tanned genuine Italian cowhide
- Natural - vegetable tanned Belgian Bridle
- Made in NYC
- Comes in R. Turbow Leather belt bag
- Comes with polishing cloth
- Sizes are based on US jeans sizing, choose your actual jeans size. Belts can naturally stretch one hole size over time, so if you are on a cusp, size down to the smaller size. To wear them lower waist or for a more loose fitting belt, size up one to two sizes.
- You can also request to add holes to your belt. There are 2" in between sizes and 1" in between belt holes. Standard belts have 5 holes, please add a note when ordering if you would like extra holes at a total of either, 7, 9, or 11. So for example, if you get a larger size belt and add 2 holes, you will be adding one size smaller to your belt. This can be good if you would like to be able to wear it both higher and lower on your waist or hips.
For additional help figuring out what size to order, please email us, we love to help.
All of our belts are gender neutral. To help you in choosing the correct size we use a standard US jeans size guide for men and women. For the perfect fitting belt, choose your actual jeans size.
If you're on the cusp of a size, we generally advise to go smaller rather than bigger as belts can naturally stretch about one hole size over time. For a looser fitting belt, or to wear your belt low waist, go up at least one size bigger.
To be able to wear your belt high and low waist, go up at least one size bigger and request to add holes to your belt. You may also want to add holes to your belt if you’d like to be able to wear it with a dress, or extra high across your real waist, or if you have an especially small waist.
There are 2" in between sizes and 1" in between belt holes. Standard belts have 5 holes, please add a note when ordering if you would like extra holes at 2 hole increments, which will be a total of either, 7, 9, or up to 11 holes.
Our belts are made with the best quality materials we can find. Many of these are sourced from the same place in Ohio from which Rebecca's father sourced his original hardware. Samples are made in Cleveland by her dad and all production is done by hand in New York City’s garment district. We are continuously searching for the most unique and well made parts and strive to make our brand as sustainably responsible as we can.
Storing your belt:
Your belt is built to last and made to be worn as much as possible, however, if you do need to store it, it is best to hang it by the buckle or coil it loosely in your R. Turbow Leather belt bag and keep it in a dark place away from excessive cold or heat.
Cleaning your belt:
If your belt scuffs or marks, clean it lightly with water and a soft cotton or flannel cloth. Wipe it down, let it air dry, and if you feel a leather conditioner or cleaner is needed, please email us for recommendations, with the exact issue you're having. As well, we can accommodate special cleaning needs, and repairs, although unlikely, if ever needed.
Hardware Care:
Solid brass can easily tarnish, especially if left out and uncovered for long periods of time without being worn, and will also tarnish with regular wear. Use the Sunshine Polishing cloth included with your belt, unless you like a more antique brass look, to keep it shiny and polished. If extra polishing is ever needed, please contact us.
Your silver hardware will not tarnish the same way brass will, but it may also need a little polish from time to time, and can generally be done with a polishing cloth or any soft cotton cloth.
For all care related questions please email customercare@rturbowleather.com